|
Post by drmemory1701 on Dec 26, 2007 14:23:50 GMT -5
Try this link: www.ima-usa.com/product_info.php/cPath/14_212_74/products_id/1514After I removed the orange barrel nut by using nail polish remover on the glue and then cleaning the threads very carefully, I found the "real" barrel nut had a larger inner diameter than the orange one. I was forced to use black vinyl electrical tape to increase the diameter of the barrel. It was trial and error until I could "screw" the real nut on the 'fake' barrel. It did work and I trimmed excess tape with a razor. I obtained good results.
|
|
|
Post by janco on Jul 24, 2008 12:38:52 GMT -5
Hi! I'm also in process of buying an AGM mp40. I'm worried about the size of a mag. Do you guys know where can I buy a pouch and I would be glad if someone tells me how long its, the mag. If I wont find any pouches, I will carry the mags in my pockets on trousers, and I would like to know if I could put the mags in a pocket. It would be better if shop where can I buy pouch in Europe.
Tnx for answers M-J
ps: I'm sorry because of my bad english:D
|
|
|
Post by gonvise on Jul 25, 2008 16:16:40 GMT -5
Hello, and sorry for my english. This is my first post, but i'm viewing this forum since several months ago...
I am trying to remove the fake plate that covered the back end of the receiver, but it is very strong. What is the best way to remove it? I'm afraid to deform the back end of the receiver.
Thank's
|
|
Sgt_Tom
Technical Sgt.
Combat!
Posts: 3,580
|
Post by Sgt_Tom on Jul 25, 2008 17:09:31 GMT -5
|
|
|
Post by janco on Jul 26, 2008 1:24:50 GMT -5
Yeah, thank you, but before I'll order those, I has to know the size of the mag. Because, if mag its small enough, I probably wont buy pouches, but I will carry them in my pockets:D So please if someone tell me how long its mag. Tnx Janco
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on Jul 26, 2008 17:04:40 GMT -5
The magazines are 9 1/4" long by 1" x 1 1/4 inches.
|
|
|
Post by janco on Jul 27, 2008 23:55:28 GMT -5
Thank you very much!!
|
|
|
Post by Silo on Mar 22, 2009 3:01:13 GMT -5
Same here. Would it be better to grind it off, or pry it? [Edit:] I removed the plate. It was spot welded so I ground off the welds and pried the plate free. Ground the rough patches smoothe and now it looks great. I'll work on the telescoping section as soon as I get some scrap metal
|
|