Post by redvonhammer on May 27, 2010 8:32:17 GMT -5
I`m taking a gamble and guess that since this part of the forum has the name "Discussion" in it, I can ask a few silly questions.
Should I be mistaken though, I offer my sincerest apologies, and admin(s) may delete the thread, with no further addo!
The thing is this:
I bought a used upgraded CA M24 sniper (Which I later added a KA Scope mount and replica Leupold M3 scope on)
It has the CA 300% tune-up job and aftermarket trigger assembly.
I`ve been using it a lot for the better part of a couple of years now, and it`s time for an overhaul (The signal being received by me when the piston o-ring came out the barrel on the last couple of rounds I fired during a local skirmish)
The gun really has served me well so far, the way it was tuned has allowed me to take out man-sized targets at about 80-90 meters (To my opponents surprise, and dismay..)
The metal parts are fine, but o-rings and gaskets are pretty much worn out, it already has a PDI hop-up assembly, but I changed the Hop-up with a new Systema hop-up I already had laying around.
I am looking all over the net (Mainly using google) But to my dismay, I cant find any gasket/o-ring sets for this gun, it seems I have to buy a complete CA 300% tune-up kit again just to get the stuff I need, which I am very hesitant about, considering it costs alot, and, as I mentioned, the metal parts are fine.
As far as I can see, even stock gaskets and rings would do the job, but alàs, none to be found, I was sort of shocked at this fact as well.
Short and sweet: Does anyone know where I can find new gaskets, seals, o-rings for a CA-M24?
Sincerely Yours
RvH
Should I be mistaken though, I offer my sincerest apologies, and admin(s) may delete the thread, with no further addo!
The thing is this:
I bought a used upgraded CA M24 sniper (Which I later added a KA Scope mount and replica Leupold M3 scope on)
It has the CA 300% tune-up job and aftermarket trigger assembly.
I`ve been using it a lot for the better part of a couple of years now, and it`s time for an overhaul (The signal being received by me when the piston o-ring came out the barrel on the last couple of rounds I fired during a local skirmish)
The gun really has served me well so far, the way it was tuned has allowed me to take out man-sized targets at about 80-90 meters (To my opponents surprise, and dismay..)
The metal parts are fine, but o-rings and gaskets are pretty much worn out, it already has a PDI hop-up assembly, but I changed the Hop-up with a new Systema hop-up I already had laying around.
I am looking all over the net (Mainly using google) But to my dismay, I cant find any gasket/o-ring sets for this gun, it seems I have to buy a complete CA 300% tune-up kit again just to get the stuff I need, which I am very hesitant about, considering it costs alot, and, as I mentioned, the metal parts are fine.
As far as I can see, even stock gaskets and rings would do the job, but alàs, none to be found, I was sort of shocked at this fact as well.
Short and sweet: Does anyone know where I can find new gaskets, seals, o-rings for a CA-M24?
Sincerely Yours
RvH