nkronsch
Private
There is no problem on Earth that can not be solved with the proper application of high explosives.
Posts: 175
|
Post by nkronsch on Aug 16, 2011 10:35:00 GMT -5
I have had this problem for a while, and I suspect the cut-off lever* is the problem. What happens is when I switch to semi-auto mode the gun still shoots (perfectly) full-auto. It seems as if semi-auto is not engaging. What are your opinions on the problem?
*If it is the cut-off lever do you know where I can buy one?
|
|
nkronsch
Private
There is no problem on Earth that can not be solved with the proper application of high explosives.
Posts: 175
|
Post by nkronsch on Aug 17, 2011 22:28:50 GMT -5
Bump.
|
|
roadwarrior
Private
Barbarbarbarbarbarbarbarbarbarbarbarbarbarbar
Posts: 262
|
Post by roadwarrior on Aug 17, 2011 23:37:05 GMT -5
I'd check to see if the part that's under the selector switch that pushes up the lever isn't messed up. Or you might need to tighten the screw that's under the pointer knob, you'll need a metric hex key (1.5) to remove the knob, The hex screw is under the pointer.
I have a King Arms Thompson, but I'm sure there the same design, I'm also not an expert.
|
|
nkronsch
Private
There is no problem on Earth that can not be solved with the proper application of high explosives.
Posts: 175
|
Post by nkronsch on Aug 18, 2011 13:00:35 GMT -5
Thanks. I'll check it out.
|
|