|
Type 92
Oct 24, 2011 13:35:27 GMT -5
Post by m1a1thompson on Oct 24, 2011 13:35:27 GMT -5
Type 92 I made from a CYMA AK47. Unfortunately, I do not have it anymore, as it was disassembled and turned back to an AK. Very cool mod though and very effective.
|
|
ackack
Private
12th SS Panzer Division "Hitlerjungend"
Posts: 317
|
Type 92
Oct 24, 2011 14:48:57 GMT -5
Post by ackack on Oct 24, 2011 14:48:57 GMT -5
Very, very nice work
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Type 92
Oct 24, 2011 18:54:08 GMT -5
Post by 2nd Bat on Oct 24, 2011 18:54:08 GMT -5
That,s pretty clever! A base AK is pretty cheap hence a very affordable custom.
|
|
|
Type 92
Oct 24, 2011 19:06:47 GMT -5
Post by Schmozilla on Oct 24, 2011 19:06:47 GMT -5
Very nice! gives some chance to Japanese airsoft.
|
|
|
Type 92
Oct 24, 2011 23:06:47 GMT -5
Post by m1a1thompson on Oct 24, 2011 23:06:47 GMT -5
Thanks for the comments guys I used an acrylic sealer on the front end which is actually a large cardboard poster tube I coated it so well that it could take a pointblank shot from my KWA M4 the fins are done by warping the tube with electrical wire and I fastened to either end and then sealed with a clear coat and painted. I took off the ak front i site and the tube fit nicely over the hand gaurds, then i packed the inside with newspaper so it wouldn't wiggle around, a spray paint cap was used for the end cap. The top receiver is made from the hand guard off a crappy spring famas. Alot of the body was put together with alot of hot glue, for the reason that it drys very quickly, looks like weld, and is tougher than hell and pliable making joints less brittle
|
|
|
Type 92
Oct 24, 2011 23:22:32 GMT -5
Post by m1a1thompson on Oct 24, 2011 23:22:32 GMT -5
I had plans for the mag i never got around to making. Basically you cut the top off of an AK47 mag so you have about an inch of mag left that doesn't stick out too much. Then you buy a SAW mag and attach the spring loading tube to the top of the AK mag, so basically you are just swapping out that M4 type adapter that fits into the saw mag well and attaching your custom AK adapter to it, now you have an auto winder mag for it.
|
|