|
Post by pwalsh117 on May 19, 2016 21:41:36 GMT -5
Hi everyone! I own an AGM MP44 and didn't like the nut that was on it. Once I marred it up a bit I decided to print a more "correct" one! Print talk:These are made from high quality AFINIA Black ABS (not hobby store junk) and printed at 75% infill with 1.6mm(4) perimeter settings. These are printed at 150 micron (0.15mm) resolution at 275 Celsius ---If you are unfamiliar with 3D printed parts!!!!They require minor sanding or preparation prior to being painted. There is light layering that is naturally associated with 3D printing, as pictured above. This is normal and to be expected parts such as this and not a lack of quality! I've test printed over 50 of these before I was finally satisfied with the "off the bed" quality. These will come already threaded for the AGM MP44 (left hand 1mm), which is the same pitch as the AGM MP40 I believe. If for any reason you would like this non-threaded just ask! PRICE: Asking for $12 Shipped in the US. If you live outside of the US, $15 Shipped. (Via PayPal)If you have any questions feel free to ask. Thanks! DISCLAIMER: These are custom replacement parts that come unpainted, paint these a color that comply with your local laws. I am in no way responsible for idiocy and lack of common sense when using this product. The Nut (Unfinished, Right off of the bed) New Nut on Rifle (Unfinished, Right off of the bed): Original Nut on Rifle:
|
|
|
Post by BigBoy on Jul 31, 2016 8:45:05 GMT -5
These will come already threaded for the AGM MP44 (left hand 1mm), which is the same pitch as the AGM MP40 I believe. If for any reason you would like this non-threaded just ask! The muzzle nut for the AGM MP44 and AGM MP40 have different threads. One is right-handed and the other is left-handed.
|
|