|
Post by bleepinfireman on Feb 8, 2017 17:00:36 GMT -5
So I am many years late to the G-43 build, but I have set my sights on a possible G-43 build in the future.
I have gotten most of the stock sizes from scaling pictures and taking measurements off of that. However, I cannot for the life of me find the dimensions to the receiver and bolt/charging handle and also the front band.
If anyone can get me dimensions to them, I would be grateful. I just need the dimensions and rough dimensions will do as well.
I can take a sketch or any other rough drawing, or a blueprint would work as well.
Most of what I have in plan are only pipe dreams as of now, but the more information I have in hand, the more of a possibility this can become.
Thanks and cheers
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on Feb 10, 2017 19:22:43 GMT -5
Sign up for and follow our member tachjagers Facebook page and you'll find everything you need relative to the G43s demensions along with lots of insight for your planned build.
|
|
|
Post by bleepinfireman on Feb 11, 2017 3:42:45 GMT -5
Thank you for your reply. Is there a link to the page? I have looked but I only came up with German pages....
|
|
adrg
Private
Posts: 210
|
Post by adrg on Feb 11, 2017 4:57:35 GMT -5
|
|
|
Post by tact2jager on Feb 13, 2017 10:30:23 GMT -5
*Keep in mind that most of the parts I built were based off of the real dimensions, however, I had to re-engineer it to fit the M14. I no longer have access to the original G43, nor do I have every dimension.
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on Feb 13, 2017 14:22:46 GMT -5
If his plan is to make an airsoft G43 he can prosper from your discoveries in the process in fact if he is serious about the project, your kit (once available) should be a terrific asset toward completing his goal. Certainly save a ton of dead ends and disappointments and no doubt produce a better result.
|
|