|
Post by rullow on Nov 19, 2018 2:57:44 GMT -5
OK, so the steel cocking handle is done.... it has the same movement and position stops as the original one and fits nicely. Also I ve added a locking lug just under the handle which prevents the bolt from moving back while shooting - locking surface is small but it should be enough - just to prevent the "bounce" now the trigger box and I can slowly try to dryfire it
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on Nov 19, 2018 3:04:56 GMT -5
Very nice. Thanks for the update.
|
|
|
Post by rullow on Nov 26, 2018 9:01:44 GMT -5
Hi again, so now the trigger assy has been completed, and the gun itself as well. Only remains the locking of teh feeding tube. Now the gun cocks and fires I ll mesure fps later this week... I have to admit that Droops trigger is an ingenious design and works flawlessly... only the rubber is the week point - hopefully I ll find a strong enough one to rely on....
|
|
|
Post by rullow on Jan 5, 2019 7:11:40 GMT -5
|
|
|
Post by rullow on May 22, 2019 1:53:39 GMT -5
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on May 22, 2019 22:52:19 GMT -5
Fabulous. Voila another WW2 boltie!
|
|
|
Post by rullow on May 24, 2019 5:44:17 GMT -5
thanks... ans some more will follow already 4-5 functional airsoft MAS36 in CZ..... but now a little work on AA52 and MAT49 needs to be done as well
|
|
|
Post by droopaille on Jun 10, 2019 13:53:52 GMT -5
Rullow, the guy who never stop !!! Really great job, you've succed where I've stopped. Good idea the spring between body and hop up. I sold one and the other was for a friend. I have none for me now and no time to finish a new one. But the MAS is pretty cool and very pleasurable in hands. I will finish a new design with removable magazine. The difference with Rullow is that I will use a striker cylinder and it is very short, that I can put the hop up in the body. Wait and see. LOL For the trigger box you can use a little spring like this, just find the good lenght. www.picclickimg.com/00/s/MTAwMlgxMDAy/z/8wUAAOSw3dtayshW/$_12.JPGWhere do find so much handle ?
|
|
|
Post by rullow on Jun 17, 2019 9:20:20 GMT -5
Hi Droop, nice to see you back here well with 3d print - I ll use the MB06 cylinder. An keep using shotgung magazines. I have the project with ARES AMOEBA STRIKER as well - for my MAS with steel body - and thats the problem - STRIKER has tle cylinder locking pin horizontally, so you gave to have enouigh strength in thebody just behind it - and there is not so much mass on tne MAS36 in this area, however the steel body could survive..... I can share teh photos with you (I do have complet AMoeba cylinder and hopup available) well none of this would be the reality without your initial work..... without that initial push - nothing happens
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on Jun 18, 2019 20:41:36 GMT -5
Between the two of you a wonderful collaberation of effort and why I love this Forum.
|
|
|
Post by rullow on Jun 29, 2020 0:26:01 GMT -5
Hi so finally I made the video youtu.be/SJJbbtuLNJQusualy it shows more than the pictures do... but I am sorry for my poor editing skills .
|
|
adrg
Private
Posts: 210
|
Post by adrg on Jun 30, 2020 1:17:13 GMT -5
That's awesome!
|
|
|
Post by rullow on Aug 12, 2020 6:03:07 GMT -5
Hi, here a new one - except for the trigger system and charger - a completely different one uses ARES AMOEBA STRIKER internals and the body is steel youtu.be/sC266yXlP-I
|
|