|
|
Post by 101st all the way! on Mar 18, 2006 20:43:12 GMT -5
I've done everthing i could to get it to quite jaming and i do the zig zag perfect. i've used gun lube everthing i can think of even my own spit! It still jams up it won't feed right i don't know what to do.
|
|
|
|
Post by 101st all the way! on Mar 18, 2006 20:43:40 GMT -5
By the way its a greaser i'm talking about
|
|
|
|
Post by indy on Mar 18, 2006 21:18:29 GMT -5
Same thing happened with me. I figured out that the dimensions at the top were not large enough so I filed the metal down where the BB exits the magazine. Try doing that...it should solve your problem.
Cheers
Thomas
|
|
2nd Bat
Master sergeant 
Posts: 11,813
|
Post by 2nd Bat on Mar 19, 2006 3:37:26 GMT -5
The only problem I had with my magazines for my greaser was that the mag well was too small which made them either too hard to put in or nearly impossible to get out. I carefully filed the inside of the mag well until they slid in and out perfectly without effort or too much give. The saftey was also difficult to pull down but over time got easier.
|
|
|
|
Post by 101st all the way! on Mar 19, 2006 9:44:33 GMT -5
The part i need to file is that where it starts to curve at the top? What kind of file should I use.
|
|
|
|
Post by 101st all the way! on Mar 21, 2006 16:03:20 GMT -5
What kind of file do I need!
|
|
|
|
Post by indy on Mar 21, 2006 23:22:04 GMT -5
Regular rasp/file for metal at Home Depot.
|
|
|
|
Post by 101st all the way! on Mar 22, 2006 8:31:27 GMT -5
thank you
|
|
