|
|
Post by Chaos on Jul 1, 2008 19:30:04 GMT -5
Does any one have a guide or good instructions for moving the JG Bar internals into a dboys 98K, there are a few threads on here but none seem to be instructions just guys showing that they have done it (with tanaka's and marushin kar's), i can probably figure it out but any help would be appreciated.
|
|
|
|
Post by Chaos on Jul 6, 2008 6:07:02 GMT -5
This is what i've done so far, still working on it, anyone got any tips on how to use the original bolt handle without to much trouble? and i can't get the mag to sit flush, it sits inside and is real hard to remove so any help with that to would be great, not the best photo  |
|
|
|
Post by CharleyNovember on Jul 6, 2008 9:12:48 GMT -5
That looks like a great start. Actually you are almost finished and it looks great. You can cut finger slots on each side of the mag well that will allow you to get your fingers in there and pull out the mag. You can buy a bolt handle blank you would then need to use a die and thread it and heat and bend it. You then need to cut off the BAR-10 handle and drill and tap it to match. epoxy in place and voila.
|
|
|
|
Post by Chaos on Jul 6, 2008 15:27:14 GMT -5
Thanks CharleyNovember yeah thats pretty much how i thought i would have to do the bolt handle, i have cut finger holes but its still to deep set to pull out, i was thinking maybe a leather tab and velcro so it covers the whole mag, unvelcro and pull down to remove the mag.
|
|
|
|
Post by Chaos on Jul 8, 2008 4:37:35 GMT -5
Wasn't going to do any work on it tonight, but once i started couldn't stop, is all but done, still have some work to do but nothing major, it works and i'm happy with it, photos aren't the best and are all done with macro so show up defects that don't stand out so bad on the real thing,... here is is  and some close ups  Don't be to harsh, this is my first ever atempt at doing something like this. |
|
TommyGunner
Staff Sgt.
Hackjob Mauro
1st Marine Division, 1942
Posts: 2,265
|
Post by TommyGunner on Jul 8, 2008 14:00:30 GMT -5
I think it looks great. Very nice job!
TommyGunner
|
|
2nd Bat
Master sergeant 
Posts: 11,813
|
Post by 2nd Bat on Jul 12, 2008 19:26:44 GMT -5
I agree it looks great. More important than what other people think How do you like it? It's your rifle enjoy all your hard work! Pat yourself on the back and thanks for sharing!
|
|
|
|
Post by Chaos on Aug 25, 2008 19:22:51 GMT -5
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on Aug 25, 2008 20:09:21 GMT -5
Wow! Very nice indeed!
|
|
Ersatzjack
Corporal
"That silly Franz... he thinks we are winning."
Posts: 1,093
|
Post by Ersatzjack on Aug 25, 2008 22:04:04 GMT -5
Looks good and is an undisputable skirmishable weapon. Nice!
|
|
|
|
Post by Boshman on Aug 26, 2008 5:08:29 GMT -5
Great job!  Glad to see you managed to get the bolt handle on aswell. makes a big diference to the overall appearance. |
|
Glad to see you managed to get the bolt handle on aswell. makes a big diference to the overall appearance.