roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 11, 2009 15:30:27 GMT -5
Hey roma! good to hear updates! can you make photos when installing the parts? I mean, could you make a guide explaining how did you change these new parts with photos? If you did, I will love you!(just kidding ) I hope this is just kidding I can make a brief description how to disassemble it. I don`t have digital camera.
|
|
|
Post by Meisterschutze on Apr 11, 2009 16:03:22 GMT -5
Ok do what you can!
|
|
|
Post by Meisterschutze on Apr 12, 2009 4:53:56 GMT -5
LoL....SORRY TO BE IMPATIENT, BUT ANY NEWS?
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 12, 2009 6:33:40 GMT -5
Sorry for my english : 1. Take off a trigger housing, then unscrew bolt 74 and separate the stock. 2. Unscrew bolt 119 and remove front sight 30 3. Unscrew part 32 and remove part 31 4. Unscrew small screw 120 and turn off outer barrel 29. 5. Remove part 28 with 79, both handguards with ring 4. 6. Unscrew bolt 118 and remove part 44 7. Unscrew two small screws 116 from ring 114 and take it off. 8. Then pull part 42 with yellow cylinder all the way down, hold it and unscrew small screw 115 and take off part 25. Then take off part 42. 9. To take the cylinder 88 off the part 42 you need to remove locking ring from it. 10.Unscrew four bolts 113 from part 41 (receiver lid), push the button for clips ejecting (part 24) and take off part 41 with part 45/43 (bolt).
|
|
|
Post by Meisterschutze on Apr 12, 2009 6:56:11 GMT -5
Thats it? How much did it take you to change all that? Was it easy for you? And mos importantly, HOW IS IT DOING? I MEAN IS THERE ANY CHANGE OR FEEL WHEN YOU SHOOT THE GARAND?
OH man...marry me!
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 12, 2009 7:26:44 GMT -5
Thats it? How much did it take you to change all that? Was it easy for you? And mos importantly, HOW IS IT DOING? I MEAN IS THERE ANY CHANGE OR FEEL WHEN YOU SHOOT THE GARAND? OH man...marry me! That is not a full disassembly. Only to change parts 42,44,45. For me it takes 10 min. I have not changed them yet, because of working on my stock. The most important change is that the marushin parts are made from some alluminium alloy, breake and wear easily with green gas. Chinese parts are more durable.
|
|
|
Post by Meisterschutze on Apr 12, 2009 7:28:12 GMT -5
Taiwanese, not chinese It is ggod to hear that they will make the garand last longer!
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 12, 2009 7:33:55 GMT -5
Taiwanese, not chinese It is ggod to hear that they will make the garand last longer! That`s right!
|
|
|
Post by Meisterschutze on Apr 12, 2009 7:36:20 GMT -5
Report back when you have changed the new parts
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 13, 2009 4:00:08 GMT -5
Changed parts 19 and 44. The taiwanese parts are made from soft iron, that is why some of them are bended a little, and need fitting during installation.
|
|
|
Post by Meisterschutze on Apr 13, 2009 5:24:53 GMT -5
Then....I mean...it is bad?
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 13, 2009 5:34:40 GMT -5
Then....I mean...it is bad? It is not too bad. It just takes some time to install them.
|
|
|
Post by Meisterschutze on Apr 13, 2009 7:30:46 GMT -5
Ok...well tell us your shooting impressions with the upgrades installed!
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 13, 2009 8:05:23 GMT -5
Ok...well tell us your shooting impressions with the upgrades installed! To improve shooting impression it is necessary to use red gase. I am not planning to do it at the nearest time. May be later. Green gas is powerful enough, particularly in warm environment. I bought these parts as a replacement for worn out marushin parts.
|
|
|
Post by Meisterschutze on Apr 14, 2009 12:32:02 GMT -5
Then, how does the garand preform with green gas with the upgrades installed? Do you think the garand blowback is harder or faster? Is it more gas efficient?(meaning: it uses less gas so you can shhot more?)
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 15, 2009 4:02:50 GMT -5
Then, how does the garand preform with green gas with the upgrades installed? Do you think the garand blowback is harder or faster? Is it more gas efficient?(meaning: it uses less gas so you can shhot more?) I will test it with new stock. Using the same gas the only thing that would change is a sound of blowback.
|
|
|
Post by Meisterschutze on Apr 20, 2009 12:12:13 GMT -5
Any updates roma?
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on Apr 21, 2009 2:38:06 GMT -5
I gave the stock to my friend for appropriate finishing. I can not do it at home.
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on May 4, 2009 13:21:42 GMT -5
Changed part #19 for new one. Its configuration is different a little. But clips fly again!
|
|
|
Post by Meisterschutze on May 5, 2009 10:30:14 GMT -5
Really? What does part 19 do? Cheers man! Was it easy to change?
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on May 5, 2009 12:16:58 GMT -5
Really? What does part 19 do? Cheers man! Was it easy to change? Part 19 is a stopper for the bolt and is responsible for clip ejecting. There is a little problem to change it because the hole for pin in it is a little bit lower than in original part.
|
|
|
Post by Meisterschutze on May 5, 2009 12:25:29 GMT -5
Are you sure you didnt mistakenly buy the part 19/23 designed for the walnut wood version? There are 2 of them. 1 for the normal ones and the other for the walnut wood version
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on May 5, 2009 13:21:07 GMT -5
Are you sure you didnt mistakenly buy the part 19/23 designed for the walnut wood version? There are 2 of them. 1 for the normal ones and the other for the walnut wood version I dont think so because there is no difference in mechanism between them, only in wood of stock. Anyway it works.
|
|
|
Post by baddog75 on May 5, 2009 13:35:18 GMT -5
This is great news,parts for the GBB Garand!!! woo hoo I think Im going to risk buying one now btw- Roma, that real stock job looks fantastic, inspired me to start the same project I think. Keep up the good work!
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on May 5, 2009 14:05:22 GMT -5
This is great news,parts for the GBB Garand!!! woo hoo I think Im going to risk buying one now btw- Roma, that real stock job looks fantastic, inspired me to start the same project I think. Keep up the good work! Thanks and good luck! I intend to fit a walnut RS stock to Marushin M1 Garand. It is a little bit wider.
|
|
|
Post by Meisterschutze on May 5, 2009 16:08:23 GMT -5
Oh! Really, the RS stock job was amazing! Its good o hear weve got a solution for the -clipnotejecting- problem!
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on May 6, 2009 4:47:26 GMT -5
Oh! Really, the RS stock job was amazing! Its good o hear weve got a solution for the -clipnotejecting- problem! The main reason of clipnotejecting problem is wearing of marushin part No19 head especially when using powerful gas. We will see how long the new part lasts.
|
|
|
Post by Meisterschutze on May 6, 2009 7:17:40 GMT -5
Ok! Its god nes for every Garand owner!
|
|
|
Post by baddog75 on May 6, 2009 7:24:13 GMT -5
This is bloody great. Ive been dying to buy the Garand for years but have had bad experiance with Marushin before - I had a Marushin M2 Last year but the bolt snapped and no spare parts Since then I aint touched Marushin , BUT now- This means I can buy the export model Garand, upgrade the parts and run on Green Gass all the time happily. It has to be GBB for me also, AEG's just not my cup of tea. Why do more folks not know about these upgraded internals for the Garand?? there are so many broken out there ,lol
|
|
roma
Private
4th Ivy division
Posts: 247
|
Post by roma on May 6, 2009 7:57:24 GMT -5
Why do more folks not know about these upgraded internals for the Garand?? there are so many broken out there ,lol Thanks to Meisterschutze for that link! It is not a well-known shop. This web site helps a lot!
|
|