|
Post by kingraptor141 on Oct 16, 2011 21:30:06 GMT -5
So my 8.4 is ok and all but... I'd rather have the faster response time, does anyone know if the 7.4LiPo will fit in the stock of the StG, that and will it not arc the trigger or just kill my gun altogether? (Skip the whole "if you run a faster motor in your car, prepare to change tires" I know this, but just not familiar with AGM and their LiPo compatibility.)
|
|
cairo1
Private 1st Class
Posts: 494
|
Post by cairo1 on Oct 16, 2011 23:25:50 GMT -5
we use an 11.(whatever) in our STG with a stock motor. works out fine so far.
|
|
ackack
Private
12th SS Panzer Division "Hitlerjungend"
Posts: 317
|
Post by ackack on Oct 19, 2011 19:52:42 GMT -5
How about a lipo in an agm mp40
|
|
|
Post by kingraptor141 on Oct 20, 2011 22:32:01 GMT -5
we use an 11.(whatever) in our STG with a stock motor. works out fine so far. Does an 11.1 fit in the stock without modifications?
|
|
|
Post by jimmiroquai on Oct 22, 2011 1:05:48 GMT -5
Re the MP44: Depends on the configuration. Get a stick type lipo will fit, a bar might not. Re MP40: If you replace the plastic bushings with metal ones, and the spring guide with one with bearings then your lipo ready.
|
|