|
Post by Meisterschutze on Apr 10, 2009 5:06:31 GMT -5
HI there! I need to reapair this gun to sell it and fund my Garand, or Ill have to sell y Tanaka.... Well, I have this really problematic M14, I mean, sometimes I think if the AEG is possesed, sometimes it will go like charm but other days you can be tempted to throw it away and bang it to pieces The problem I have is that when I pull the trigger slowly (selector plate set in semi auto) the gun will shoot in burst befor stopping. Whe I pull the trigger fast, the M14 will shoot corrctly in semi. Any solutino to this problem?
|
|
|
Post by toboggan on Apr 10, 2009 9:09:28 GMT -5
thats exactly what mine did, and mine is Echo1. What i saw, was when you take the reciever out, there is a clear (maybe different colored for you) plastic bar that runs along the back, with two tabs that attach to the fire selction mechanism. On mine, it was broken, but im not too sure if that was it. because i put it back together, and it still shot full auto. I notice, that plastic bar moves a lever on mine too, and that lever wasn't being pushed all the way down!
You're going to have to take your reciever apart/ off the stock to check it out.
|
|
deacon
Private 1st Class
Posts: 748
|
Post by deacon on Apr 12, 2009 10:59:31 GMT -5
Toboggan is semi right, its a small spring that keeps the lever down that gets weak over time. switch it out with a new one or the spring of the same type and size and you should be good to go.
|
|
|
Post by Meisterschutze on Apr 12, 2009 12:14:37 GMT -5
Where am I going to get a spring so small?
|
|
|
Post by toboggan on Apr 12, 2009 13:18:01 GMT -5
a hardware store? lol
|
|