Post by grifter on Sept 16, 2014 4:29:49 GMT -5
The Boys anti-tank rifle custom of having been made here:
See here for more details + a video explanation.
www.ww2airsoft.org.uk/php/phpBB2/viewtopic.php?f=13&t=9331
The idea had come to me during his side axis.
After putting his hand at the Bar98k, M1903 A4, here in the course of customs totally useless so essential on the Panzerbüchse PzB 39 [/ b].
I say "totally unnecessary" because these 1m60 9kg for a bolt that is not too maneuverable, no gain compared to just K98 of the mouth.
A brief history via Wiki: [/ b]
The Panzerbüchse 39 (abbreviated PzB39) is an anti-tank guns, used by the German army at the beginning of World War II in 1917 mondiale..En Germans develop the first anti-tank in history, the 1918 Mauser rifle T Gewehr. This weapon does not entirely satisfactory, the German army wants to develop a new model for the inter-war period.
This new anti-tank gun has a total mass of (12.6 kg). To increase its rate of fire, two magazines with a capacity of 10 cartridges each are installed on both sides of the barrel: they serve only reserve the shooters replenish the gun faster. Some 39 of 568 PzB available to the invasion of Poland we get almost 25300 units during the invasion of the USSR. Staffing remains until 1944, when he gradually retreated lines, proving powerless against Allied armor, although it is still useful against light vehicles.
My custom is an "evocation", I mean an "evocation" for several reasons, I wanted to make a replica cheap (not too mean to that time), based on the bar10 control and I had to advance. Also lacking machine tools I could not make a certain number of pieces.
So custom not to judge on the basis of my other replicas, not there for me to have spare parts.
I would improve in as knowing he could be only "vaguely" like the cocking mechanism of true being I think very difficult to adapt in airsoft.
It is a purely aesthetic custom, indeed on it I can remove the bar10 just by removing a few screws.
All made of PVC pipe and drop the gun.
PVC and up to the MP40 flash hider
In my scrap wood for the body, forearm and grip.
2 steel pipes for the stock and wedged into each other.
The two ammobox are made of plywood and are removable, they allow the carriage of each 2 bar10 magazines stalled.
The bipod is home made (to improve), fit that of the MG34 would cost me too dear for an uncertain result.
I still have to do the carry handle and the rigging system of the stick for it once it is folded / resting position.
See here for more details + a video explanation.
www.ww2airsoft.org.uk/php/phpBB2/viewtopic.php?f=13&t=9331
The idea had come to me during his side axis.
After putting his hand at the Bar98k, M1903 A4, here in the course of customs totally useless so essential on the Panzerbüchse PzB 39 [/ b].
I say "totally unnecessary" because these 1m60 9kg for a bolt that is not too maneuverable, no gain compared to just K98 of the mouth.
A brief history via Wiki: [/ b]
The Panzerbüchse 39 (abbreviated PzB39) is an anti-tank guns, used by the German army at the beginning of World War II in 1917 mondiale..En Germans develop the first anti-tank in history, the 1918 Mauser rifle T Gewehr. This weapon does not entirely satisfactory, the German army wants to develop a new model for the inter-war period.
This new anti-tank gun has a total mass of (12.6 kg). To increase its rate of fire, two magazines with a capacity of 10 cartridges each are installed on both sides of the barrel: they serve only reserve the shooters replenish the gun faster. Some 39 of 568 PzB available to the invasion of Poland we get almost 25300 units during the invasion of the USSR. Staffing remains until 1944, when he gradually retreated lines, proving powerless against Allied armor, although it is still useful against light vehicles.
My custom is an "evocation", I mean an "evocation" for several reasons, I wanted to make a replica cheap (not too mean to that time), based on the bar10 control and I had to advance. Also lacking machine tools I could not make a certain number of pieces.
So custom not to judge on the basis of my other replicas, not there for me to have spare parts.
I would improve in as knowing he could be only "vaguely" like the cocking mechanism of true being I think very difficult to adapt in airsoft.
It is a purely aesthetic custom, indeed on it I can remove the bar10 just by removing a few screws.
All made of PVC pipe and drop the gun.
PVC and up to the MP40 flash hider
In my scrap wood for the body, forearm and grip.
2 steel pipes for the stock and wedged into each other.
The two ammobox are made of plywood and are removable, they allow the carriage of each 2 bar10 magazines stalled.
The bipod is home made (to improve), fit that of the MG34 would cost me too dear for an uncertain result.
I still have to do the carry handle and the rigging system of the stick for it once it is folded / resting position.
