|
|
Post by cyanide on May 24, 2007 4:47:40 GMT -5
Hi, I got a AGM MP40. It is in parts (I did not pull it down), I've been putting it back together, but I can't figure out where a spring and another bit go. Any ideas?  |
|
|
|
Post by lopik on May 24, 2007 9:43:15 GMT -5
hi! sorry for my english in advance...it is a part of folding stock (in the the last piece of shoulderstock...horizontal and vertical changing)... ;D
|
|
|
|
Post by cyanide on May 24, 2007 16:16:52 GMT -5
ah, ok. thanks.
the folding stock was already attached to the body and end bit working. odd. will check it out when i get home from work.
|
|
|
|
Post by killbucket on May 25, 2007 10:54:42 GMT -5
Because there are two of these assemblies, one on each side of the stock's shoulder brace. They go into the ends before the rotating part goes on. The stock will seem normal with only one in place. AK underfolders have these same bits.
|
|
|
|
Post by cyanide on May 25, 2007 17:02:29 GMT -5
Yep, you are right. One is missing.
Cheers fullas. Was first gun/mech box build so wasn't sure about the parts. Thought it may have been something I'd missed in the mech.
|
|
