DeB
Private
AGM MP40 - Marui M733 and G3A4 Revenant
Posts: 179
|
Post by DeB on Feb 10, 2008 15:14:40 GMT -5
Hi guys!
My MP40 motor get burnt yesterday... i was making some tests and I removed the fuse 1 minute before the motor damage..... and now I have to change it but I have not a "short" type motor at home so I have no idea if the MP40 motor is Marui short motor compatibile...
Do you know it??
Thank you!!! ;D ;D
|
|
|
|
Post by redvonhammer on Feb 10, 2008 15:21:54 GMT -5
I think this might be solved pretty easy.
Exactly how long is the engine from pinion gear to end. And how thick and wide is it? I have 1 CYMA Short motor and 1 Systema Short motor, both fits in my CYMA Thompson. If your motor is atleast the same as my CYMA Thompson short motor, you should be fine by buying a new one (Though I`d recommend buying a new China motor. Read my below topic on Thompson Systema Motor and you will understand why I recommend that...)
Awaiting update!
RvH
Edit: Forgot to mention my motor dimensions:
Using Centimetres:
Its 7.4 CM long.
2.5 CM thick, and 2.8 Wide.
|
|
DeB
Private
AGM MP40 - Marui M733 and G3A4 Revenant
Posts: 179
|
Post by DeB on Feb 10, 2008 15:44:02 GMT -5
thankyou! im going to read the topic!
|
|
biged
Master sergeant 
Posts: 468
|
Post by biged on Feb 10, 2008 15:59:11 GMT -5
A short type motor will fit in it.
Try the motor in another gun. You may have fried a selector plate or trigger switch assembly.
To test the old motor just hook it up to another guns leads, hold onto the motor and pull the trigger. If the motor runs something else shorted out in the wiring.
///ed///
|
|
DeB
Private
AGM MP40 - Marui M733 and G3A4 Revenant
Posts: 179
|
Post by DeB on Feb 11, 2008 3:16:59 GMT -5
yes I have already tested it... it is gone on heaven... The little problem that I have not another type of weapon equipped with short type motor...
Anyway I'm gonna ask to a freind if he has a short motor to try before buying another one...
Thank you!
Bye bye!
|
|
