|
|
Post by 297sh43757 on Mar 25, 2008 18:09:26 GMT -5
My Cybergun Thompson is not working. I've had it since Christmas, and it has worked fine up until recently. When I pull the trigger, nothing happens, as if the battery is not even in it. I know the battery is at full charge, and nothing happens still. What is wrong with my gun?  |
|
Medic
Sergeant
I'm 12 not 25!
Posts: 1,539
|
Post by Medic on Mar 25, 2008 18:33:54 GMT -5
I had a gun (remember, I am not an expert on airsoft guns) that would do that. I may like stall after a few long, long bursts. Really, that's all I know.
|
|
|
|
Post by CharleyNovember on Mar 25, 2008 21:42:47 GMT -5
fuse bad? disconnected wire somewhere along the way? Does it make any sound when you pull the trigger like it is trying to turn over or does it give you nada? Have you tried a different battery that you know is working or tried the battery you are talking about in another airsoft gun?
|
|
|
|
Post by 297sh43757 on Mar 26, 2008 19:27:11 GMT -5
No, I know the fuse is fine, it does not make any sound when I pull the trigger,and I know the battery is fine, I tested it. I don't know if a wire is disconnected though.
|
|
|
|
Post by CharleyNovember on Mar 26, 2008 19:38:48 GMT -5
check that next as it is the cheapest.  |
|
|
|
Post by wade on Mar 26, 2008 19:41:18 GMT -5
Check the wires connecting to the motor, that might be it.
|
|
Seff
Private
.30-06 - Turning Cover into Concealment since 1906
Posts: 344
|
Post by Seff on Mar 28, 2008 14:16:26 GMT -5
How did you test the battery? The stock CYMA batteries are really poor - I have a CM.028 from CYMA where the battery won't give enough power for a cycle of the gears. If I put in a standard battery from any other gun, it merrily chops away.
|
|
|
|
Post by harvey425 on Apr 24, 2008 21:45:28 GMT -5
I had the same problem !!! Some times when you go to connect the battery, there is a pull on the wire that goes thru the stock into the reciever, at that juncture, there is a male/female connectors same as the battery connections. From pulling to connect the battery these come loose. Take the stock off by taking out the bottom 2 screws, & check the connection, & tape them togeather. Hold the gun upright so the screws grab the threads from the bottom. lol
|
|
