|
|
Post by GermanShepherd on Nov 10, 2008 18:29:02 GMT -5
Can someone eplain the science of a GBB pistol. I just got one from hank. I bought a propane adapter for it and I fill it and it only shoots 5-6 and locks up and shoots this ice-ee frosty mist everywhere. I don't know wether it's the propane , mag, or the gun itself . I just bought a new mag and it does the same thing. Can someone help me?  ? Please!!!  |
|
|
|
Post by GermanShepherd on Nov 10, 2008 18:37:58 GMT -5
I don't know very much about them. I always have used AEG's
|
|
kalbs
Master sergeant 
Posts: 1,142
|
Post by kalbs on Nov 10, 2008 19:04:17 GMT -5
Can someone eplain the science of a GBB pistol. I just got one from hank. I bought a propane adapter for it and I fill it and it only shoots 5-6 and locks up and shoots this ice-ee frosty mist everywhere. I don't know wether it's the propane , mag, or the gun itself . I just bought a new mag and it does the same thing. Can someone help me? ? Please!!! On the back of the magazine there is a small slide that covers the gas pressure button. Make sure this black slide is not keeping the button pushed in when filling the magazine or the gas will just escape. Thry that first. It appears the gas is not staying in the magazine becaus ethis release button is not fully out. |
|
|
|
Post by GermanShepherd on Nov 11, 2008 8:53:55 GMT -5
Ok , I tried that. Its getting the gas and holding it. It just seems like its not holding enough. I dont know weather I'm pushing the propanr thing in there to hard or if this thing is so much of a V8 it sucks gas. I shot two loaded mags finally last night, but they were not consistant. So I know that they will hold enough gas to empty all 15 bb's. I wonder it there is something wore out in it ,...like a small part or something? I will break the gun down, and if there are any parts that you guys know of that wear more than others, let me know what they normally look like before wear and when worn to much. Thank you guys.
|
|
|
|
Post by CharleyNovember on Nov 11, 2008 17:50:24 GMT -5
Call Chuck at Georgia Airsoft he may be of some help I know he sells that brand. It may be something he has seen before. Worse comes to worse I'll give you 10.00 for it on Saturday.  |
|
|
|
Post by troyluginbill on Nov 11, 2008 23:12:41 GMT -5
shoot a bunch of silicone into the release valve and then press it in and out (while empty of gas) with your finger to get a good coat into the valve. It could just be sticking and have a bad/weak spring so that you are not getting a full return of the valve nubbin after the gun has fired.
Or buy a TM mag. I understand they work in the WEs. Never tried it though.
|
|
|
|
Post by GermanShepherd on Nov 12, 2008 9:14:16 GMT -5
Siliconed it up and she is back to hitting hard!!!  I also learned that releasing that gas will freeze the crap out of your fingers. Oh and CharleyNov. I guess you missed out on that one my friend. |
|
|
|
Post by ramborob17 on Nov 12, 2008 14:27:52 GMT -5
I would have given you $15  |
|
? Please!!! 
I also learned that releasing that gas will freeze the crap out of your fingers. Oh and CharleyNov. I guess you missed out on that one my friend. 