|
|
Post by tt on Jan 17, 2009 16:56:41 GMT -5
Hello everyone, I have a very irratiting problem with my dboys kar98, first of all, the saftey doesnt work. But thats not the irritating part, when I try to push the bolt forward, the little teeth things on the bottem of the black safety thing moves and swivels so it wont fit into the grooves. Also the black saftey thingy swivels at a 360 degree angle, can anyone help, I have some pics, but if therir not of the right thing, tell me and Ill take more I really dont want to have to send this gun back.    THIS IS AS FAR AS THE SAFTEY LEVER GOES  THESE ARE WHAT I MEAN BY TEETH THINGS   |
|
|
|
Post by tt on Jan 18, 2009 6:43:02 GMT -5
Anybody?
|
|
|
|
Post by lrich on Jan 18, 2009 14:20:26 GMT -5
i think what you need to do is take the bolt all the way out of the gun, and screw the whole safety assembly onto the gun some more. It may take a little effort as the little pins that push into the bolt will get in the way, use a knife to push them back in.
That is what happened with mine. Does that make sense?
|
|
|
|
Post by tt on Jan 18, 2009 18:45:15 GMT -5
Kind of... where are the screws your talking about, I cant find any. And do you want me to take the black saftey chunk off completely?
edit: and thanks for replying.
|
|
|
|
Post by Obergefreiter Raimund on Jan 19, 2009 8:35:51 GMT -5
The screws are on the back of the bolt where the safety is.
|
|
|
|
Post by lrich on Jan 19, 2009 21:50:13 GMT -5
what i mean is that the whole safety assembly is threaded, so you have to screw it on more. I said take the bolt assembly out as then it is easier to screw it on. So instead of taking the black safety thing off, screw it the other way. And the little pins may or may not be a problem, they are the ones that click when you rotate the bolt up or down to cock the gun.
|
|
|
|
Post by tt on Jan 20, 2009 5:55:08 GMT -5
Ok, Ill try that.
|
|
|
|
Post by tt on Jan 24, 2009 2:10:52 GMT -5
Ok, I really hate to sound like a whiney loser, but what do you want me to screw where? I took the bolt out and now what? I truely do appricate your help. |
|
|
|
Post by lrich on Jan 25, 2009 19:01:40 GMT -5
Sorry for the slow response, but once you have the bolt, grab the bolt assembly in one hand, the safety assembly (with safety off) in the other hand, and screw them in opposite directions. You will have either: screwed off the safety, or screwed it on all the way. You want to screw it on all the way. If it gets tough, don't force it, look on the end of the safety, there might be little spring loaded pins jammed onto the bolt. Use a knife to push them back into the safety. Once you screwed it all the way tight, back it off enough that the safety lines up with the safety slot.
|
|
|
|
Post by tt on Jan 27, 2009 6:19:44 GMT -5
I did that and it worked, thank you so much.
|
|
"]