|
Post by savage94 on Jul 8, 2009 14:46:15 GMT -5
does any one know where to buy a cutts compensator for my thompson m1a1/m1928 ? im working on making i a full m1928 but im hurting on cash. i just want a cheap one that i can just throw on it.
|
|
|
Post by lrich on Jul 8, 2009 23:32:43 GMT -5
What tools do you have access to? With 3 inches of .75 inch PVC and 2 inches of .5inch PVC (the smaller nestled inside the larger) and a lathe to round the front, i was able to make a reasonable Cutts compensator for one that I made. Now if you don't have a lathe, making the front might be a little difficult, but not impossible. Other than making it yourself, you wont be able to find a cheap one, and even ones you find may not work, as those don't just slip on, but are bolted and/or screwed on, and the bolt is just molded on the airsoft version (for makers simplicity's sake.)
|
|
|
Post by savage94 on Jul 9, 2009 4:41:37 GMT -5
cool okay, well i have access to a lathe because my grandfather is a machinist. thank you!
|
|