|
Post by krieger91 on Jun 20, 2010 17:29:35 GMT -5
I would like to have a complete list of parts that the AGM mp44 uses. This is for upgrading info and knowing what fits and what doesn't. I am still new to airsoft and so far I know V2 8mm Gearbox 450mm barrel Motor- Spring- I use a 8.4v 1600mh battery Would these "ready to go" gear boxes fit this aeg? www.airsoftpost.com/product_info.php?cPath=24_68_518&products_id=30248Thanks guys!
|
|
Sgt_Tom
Technical Sgt.
Combat!
Posts: 3,580
|
Post by Sgt_Tom on Jun 20, 2010 17:36:07 GMT -5
I am pretty sure its stock spring is fine the way it is. You probably don't want it shooting over 400fps which is what it shoots now. I think the motor is fine too. The only thing I'd probably do is get a tightbore barrel too improve accuracy. The internals will probably wear out at some point but I'd just use them till they do, thats just me though.
|
|
kalbs
Master sergeant
Posts: 1,142
|
Post by kalbs on Jun 20, 2010 18:11:29 GMT -5
Just think M16. Internal parts are the same as is the hop-up and motor.
|
|
|
Post by krieger91 on Jun 20, 2010 18:48:17 GMT -5
Why do I not want it shooting over 400fps? And what exactly is the type of motor? Long type, short, I need a little info here. I tried finding a new barrel and this is the only one I could find for the most part.. seems little pricey? www.airsoftgi.com/product_info.php?products_id=6739All this info is for when something does break, and it WILL. So I am trying to get a list of what I have/need, as in the spring wears out, I will know exactly what type I need to buy.
|
|
|
Post by CharleyNovember on Jun 20, 2010 19:20:38 GMT -5
Most reputable places to play have a hard limit of 400fps for AEG's over that and you are stuck on semi auto at best or worse case they tell you you can't use it. I would downgrade the spring to something more useable and in the 350fps range. I have always liked PDI brand springs but can't remember exactly what spring will put you at 350fps. adding a tightbore barrel will bump you up 5-15 more fps so that puts you areound 360-370fps which should be about perfect. While you have it apart might aswell check the shims. Give this website a look it should help you up when you need to crack open that box. www.mechbox.com/mechbox/v2-mechbox-spring-upgrade.html
|
|
|
Post by krieger91 on Jun 20, 2010 19:34:04 GMT -5
There is a very nice new field near me, open every weekend and had about 75 or more people opening day. I was shooting about 420 fps, the limit is 450. So I think that should be fine? I'll be sure to watch that, I didn't know the fps went up like that because of the barrel.
|
|
|
Post by CharleyNovember on Jun 20, 2010 19:37:34 GMT -5
Not the place for an FPS debate but I wouldn't play with people that have an FPS over 400. I've seen way too many incidents like that. Where in the country are you? Or outside the US?
|
|
|
Post by krieger91 on Jun 20, 2010 19:54:05 GMT -5
Central FL, I wear a mouth guard to protect my teeth.
|
|
|
Post by CharleyNovember on Jun 20, 2010 20:51:10 GMT -5
Of course FL...lol. I am in Jacksonville, FL. This new place is not that place opening in Orlando "Combat City" is it?
|
|
|
Post by krieger91 on Jun 20, 2010 20:53:01 GMT -5
it is, know anything about it? Do you do blank fire reenacting too?
|
|
|
Post by CharleyNovember on Jun 20, 2010 20:53:50 GMT -5
I'll PM you.
|
|
|
Post by krieger91 on Jun 22, 2010 15:20:14 GMT -5
Darn shame, the only place that was any good near me just changed the limits from 450fps to 400. So now I have nowhere to play, too bad there were never really any mp44 snipers.. oh well.
|
|
Sgt_Tom
Technical Sgt.
Combat!
Posts: 3,580
|
Post by Sgt_Tom on Jun 22, 2010 16:14:51 GMT -5
Just get a downgraded spring and have someone install it for you. It shouldn't cost that much.
|
|
|
Post by krieger91 on Jun 22, 2010 16:30:19 GMT -5
I wouldnt mind doing that, if anyone could tell me the spring I have in the gun right now. Like I asked earlier, what spring is it? Nobody seems to know. And why exactly are all these airsoft guns being sold shooting over 400 fps stock? But nowhere can you play with that kind of speed?
Getting pretty close to just going back to blank fire reenacting and playing video games, this is starting to turn into more trouble than it's worth.
|
|
|
Post by CharleyNovember on Jun 22, 2010 17:40:54 GMT -5
Ahhh don't give up so easily. you already have the impression might aswell keep the gun and do both. It's a chinese gun so no one will know what spring is in it. The chinese figured higher fps was better and have been selling guns that shoot hot for awhile now. I pm'ed you to let you know there is atleast one other guy in FL that does WW2 down your way. We need a way of getting us all together for a game hell a small 3 on 3 or 6 on 6 scenario would work just fine I think.
a PDI 130% spring should yield roughly 350 - 370 f.p.s. It's not exact but in that range somewhere.
|
|
|
Post by scharfschutze on Jul 2, 2010 11:07:09 GMT -5
I also have a couple of questions about the AGM MP44, I got a buddy who does the WW2 Airsoft thing with me and he has one of em, its a pretty good gun stock but he wants a bit more accuracy. I do little upgrades for my team (spring, Barrel, sometimes even rewire a battery, But I never get into the gear boxes) Well anyway, Does any one know were to get a tightbore barrel for the AGM MP44 thats not 70$, the cheaper the better. Thanks, Zac
|
|
cairo1
Private 1st Class
Posts: 494
|
Post by cairo1 on Aug 25, 2010 22:21:51 GMT -5
anybody know where a guy can find a Rear sight slide thingy, mine broke in half
|
|