|
|
Post by summvideo on Aug 24, 2010 0:41:26 GMT -5
I purchased a used Cybergun Thompson on eBay, and everything seems perfect, except that the small set screw that goes on the top of the barrel at its connection point is missing. What size screw is it? Where can I get a replacement?
|
|
Sgt_Tom
Technical Sgt.
Combat!
Posts: 3,580
|
Post by Sgt_Tom on Aug 24, 2010 1:21:52 GMT -5
I'd suggest going to a hardware store with the barrel and find a screw that will work. Also you might want to put some tape on the part the barrel connects to so it will be more secure.
|
|
|
|
Post by the2ndranger on Aug 24, 2010 21:20:10 GMT -5
I had the same problem I went to the store (With the whole gun in hand) and got screws and epoxied them on.
|
|
Sgt_Tom
Technical Sgt.
Combat!
Posts: 3,580
|
Post by Sgt_Tom on Aug 27, 2010 15:45:49 GMT -5
I would not take the whole gun to a store.
|
|
|
|
Post by tinydata on Aug 27, 2010 17:48:09 GMT -5
I looked at my TM M1A1 manual and in the parts guide the screw has M3X3 underneath it. Not sure if its the measurement, but I suspect it might be.
|
|
|
|
Post by summvideo on Aug 29, 2010 8:24:34 GMT -5
I wonder if the Cybergun takes the same size screw as the TM ?
|
|
|
|
Post by tinydata on Aug 29, 2010 9:44:32 GMT -5
It should. I doubt CYMA would bother to change any sizings. Its supposed to be a clone
|
|
|
|
Post by CharleyNovember on Aug 29, 2010 17:02:10 GMT -5
an M3 is sometimes hard to find. I have had better luck with small independant ACE hardwares and the like finding odd hardware like this. Big Box stores are applesauce and most of the time when you ask them for something they stare at you like a deer in headlights.
|
|
