|
|
Post by mischief on Dec 6, 2010 1:17:46 GMT -5
I just got a version 2 Sten from a friend, it came with the 8.4 stick battery(as soon as he gets the battery to me that is). I hear it is tough to put into the stock and really just a pain in general. I know the first version Sten had the 7.4 Lipo, could I still put the Lipo in the version 2?
Also can I use the 7.4 lipo in my MP40?
|
|
|
|
Post by CharleyNovember on Dec 6, 2010 10:32:50 GMT -5
Yes on the Sten question. Not positive on the MP40 one but it might fit in there.
|
|
|
|
Post by freelancer on Dec 6, 2010 16:34:21 GMT -5
yes the small type 7.4 lipo will fit in the MP40's
|
|
|
|
Post by mischief on Dec 6, 2010 18:11:55 GMT -5
Well thank you both very kindly... now to get the lipo batteries and a good charger/balancer and I'll be good.
|
|
|
|
Post by Rapture on Dec 6, 2010 18:28:21 GMT -5
Just make sure the gun can handle a lipo internally. In some guns the internals are wank so a lipo will turn them to dust. Just a word of advice.
|
|
|
|
Post by mischief on Dec 6, 2010 20:19:52 GMT -5
That is the main reason I'm sticking to the 7.4 and not going push anything too much. Mostly I tried to put one of the 8.4 sticks I had laying around and it was hard to get in the stock(for the sten), and even worse trying to get it back out. As for the MP40 I have two so I'll try the lipo in one and see what happens. If it needs rebuilt after then I'll know not to use the lipo on the other one.
|
|
