|
|
Post by jmw1955 on Mar 26, 2011 0:15:42 GMT -5
Great weapon! Anyone know where to find one? Everyone appears to be out of stock with no insight as to when it will be back in. If it were made in Japan I could understand given the circumstances of recent weeks, but I believe these are produced in Taiwan. Thanks!
|
|
|
|
Post by newcomer on Mar 26, 2011 0:38:03 GMT -5
the only place i knew of that carried it in the states was ontargetairsoft.com, but they ran
out of stock a long time ago. If you havent done so already, you could search the overseas vendors or watch the forums and get one second-hand.
|
|
|
|
Post by nkn538 on Mar 26, 2011 8:26:14 GMT -5
Dont get one....I got one at ontarget airsoft 2 months ago....broke on me 3 times and I had to get a refund, Ontarget had GREAT service, but I wouldnt get one...
|
|
Sgt_Tom
Technical Sgt.
Combat!
Posts: 3,580
|
Post by Sgt_Tom on Mar 26, 2011 9:06:03 GMT -5
What problems did you have? I have heard the SRC was the best MP40 on the market.
|
|
|
|
Post by nkn538 on Mar 27, 2011 20:44:35 GMT -5
That maybe but think of it this way, It may be the best model of the gun, but not the best gun... example: the Tokyo Marui Uzi is the best aeg Uzi on the market, but it is not a very great gun... I dont know if it was my gun or the model, but I just had a bad expierience  |
|
Sgt_Tom
Technical Sgt.
Combat!
Posts: 3,580
|
Post by Sgt_Tom on Mar 27, 2011 21:20:01 GMT -5
I've heard it was best in performance, looks, and build quality. What problems did you have with it?
|
|
|
|
Post by nkn538 on Mar 28, 2011 18:20:22 GMT -5
Looks definetly great and externals were flawless, but My gears kept on stripping and it was a very bad experience
|
|
kalbs
Master sergeant
Posts: 1,142
|
Post by kalbs on Mar 29, 2011 10:01:28 GMT -5
Gears stripping? Thats really hard to do. Usually the piston will strip but not gears. Can you be more specific about what gear/s? Sometimes a low motor height setting can strip a bevel gear over time or pop a pinion tooth or I've seen the selector pop teeth from a hard piston but never seen a stripped gear/s.
|
|
|
|
Post by nkn538 on Mar 29, 2011 17:34:54 GMT -5
ya It was the low motor height I recall that stripped the gears, anyways Ive already gotten my refund and ive got a new gun
|
|
kalbs
Master sergeant
Posts: 1,142
|
Post by kalbs on Mar 29, 2011 19:29:45 GMT -5
ya It was the low motor height I recall that stripped the gears, anyways Ive already gotten my refund and ive got a new gun Then this means one cannot discount the internals quality due to a low motor height setting. With experience you will eventually be able to hear the problem when you first fire any AEG. I would assume this issue to have been a rare encounter with the SRC MP40. SRC as a standard installs hard steel gear sets of which I have never encountered an inproperly shimmed set to date. i would chaulk this one up to just plain bad luck. |
|
|
|
Post by nkn538 on Mar 29, 2011 19:55:58 GMT -5
Ya im sure it was rare occasion
|
|
|
|
Post by iamthedevil on Sept 1, 2011 23:25:31 GMT -5
yeah ive had problems with mine as well, a few bushings broke so i replaced them and it still sucked so disabled the blowback feature and it works okay i plan to upgrade the internals and only other complaint is the mags wobble and dont feed do to wobble. simple fix-tape
|
|
