|
|
Post by 506pir on Apr 25, 2011 19:57:31 GMT -5
Hey guys I have made a 1919 30 cal. which I wish to put a m14 gearbox into it but I really dont know how to can anyone give me some advice or where to postion it. I see killbucket has some kinda connector to the trigger to the gearbox or something like that to make it more realistic but I haven't found out what the is please somebody help me out on this.
Thanks
|
|
HornetWSO
Private 1st Class
"We may not have a history, but we have a rendezvous with destiny!"
Posts: 551
|
Post by HornetWSO on Apr 26, 2011 15:16:02 GMT -5
Hey guys I have made a 1919 30 cal. which I wish to put a m14 gearbox into it but I really dont know how to can anyone give me some advice or where to postion it. I see killbucket has some kinda connector to the trigger to the gearbox or something like that to make it more realistic but I haven't found out what the is please somebody help me out on this. Thanks I've built one and put an M14 inside. If I had to do it all over, I would have plumbed it with a SAW gearbox and barrel. I'll post more later on what I discovered during the process when I have some time to do a proper write up. |
|
|
|
Post by 506pir on Apr 26, 2011 16:22:13 GMT -5
thanks man I really need the help so yeah sometime when you get the time try to explain.
Thanks
|
|
2nd Bat
Master sergeant 
Posts: 11,813
|
Post by 2nd Bat on Apr 26, 2011 16:43:20 GMT -5
I know there are several folks on this site that have doen up M1919s and most used the M14 gear box which works fairly well. As mentioned the SAW gearbox is better but since you have one it will work fine.
I've done four 30 Cals and frankly your biggest challenge will be the feed system. It's all quite doable and makes for a really cool gun but it's kind of a pain.
|
|
biged
Master sergeant
Posts: 468
|
Post by biged on Apr 26, 2011 18:00:56 GMT -5
|
|
|
|
Post by 506pir on Apr 26, 2011 19:45:53 GMT -5
ok I have to get a microswitch now I need to know where do I hook the other end of the wire to the gear box can you tell me that and I should be about good. I'm confused if I wanted the gearbox to feed the regular m14 mags do I hook the wire to the same spot or couldn't I do that?
|
|
|
|
Post by 506pir on Apr 27, 2011 16:15:05 GMT -5
Or what could I do to make it work
|
|
biged
Master sergeant
Posts: 468
|
Post by biged on Apr 30, 2011 7:56:53 GMT -5
 If you do not want active braking, then you eliminate the black wire on the 87a. ///ed/// |
|
