|
|
Post by walther38 on Oct 8, 2012 12:31:38 GMT -5
Have you ever had with this pistol such experience that after loading the magazine and cocking to load the first BB into the chamber it shooted all BBs in magazine. I have loaded magazine several times and the result was the same. What would be the cause?
|
|
2nd Bat
Master sergeant 
Posts: 11,813
|
Post by 2nd Bat on Oct 8, 2012 14:11:04 GMT -5
The seer is not catching between shots, hence it is firing full auto.
|
|
|
|
Post by jettalewis on Oct 8, 2012 14:50:30 GMT -5
Pot metal, junk metal parts. My P08 only shot one clip and then would dump everything with the pull of the trigger. When I examined it the internals had sheared off or worn off in that short period of time. There was a thread about it and lots of people reported the same or similar probs. If you come up with a solution please let everyone know.
|
|
|
|
Post by aj czarkowski on Oct 8, 2012 16:32:06 GMT -5
A friend of mine's P08 did the same thing and he didn't even fire a full magazine (I was there when he unboxed it and fired it for the first time). As said above, the pot metal sear wears down quickly. There might be a steel sear as a replacement somewhere, but I wouldn't know where to look (most likely RA Tech)
|
|
|
|
Post by jettalewis on Oct 9, 2012 13:01:20 GMT -5
I have looked for steel replacement parts to no avail. Maby someone else has heard of them ?
|
|
|
|
Post by brownien on Oct 9, 2012 14:19:46 GMT -5
Is it a simple enough shape to make out of steel yourself? I'm sure a machine shop would have the proper size piece to work with in their scraps bin.
|
|
|
|
Post by remrat on Nov 3, 2012 14:26:40 GMT -5
I have had a WE Luger for years and it has been nothing but problems I just started to work with mine again last night I will see If i can machine a new sear and I will let you know how it goes.
|
|
|
|
Post by sgtkillroy1944 on Dec 3, 2012 0:59:07 GMT -5
|
|
