AGM m14 gas tube replacement

[madmarcs]

Hi guys, i'm going to apologize in advance for this thread as it does not directly concern a ww2 rifle but i know you guys are constantly modifying m14s so i figured this would be the place to ask. Recently i bought a used m14 for cheap (the guy i bought in from has 400$ of parts in it though) knowing that the gas tube was broken and the barrel cover was separated from the lower receiver. So i did some digging and found a replacement gas tube for a tm m14 on ebay and i was wondering if it would fit the AGM. I know they are clones and i doubt anyone can answer this question, but will this part work? Thanks.

Link: www.ebay.com/itm/Gas-Tube-Assembly-Tokyo-Marui-M14-Airsoft-Spare-Parts-/120879870739?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D3094441857937628387%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D120879870739%26

[2nd Bat]

The threading on the assorted M14 clone gas tubes believe it or not are in many cases slightly different. Different threads sometimes and different lengths for others. hence they are not neccessarily inter changeable. i just got in a used M14 with a broken charging handle and had to dig through several spare parts I had to find one that fit. my parts bin for M14 parts includes bits from UTG, TSD, Cyma, AGM, Marui GnG and probably others. Unfortunately they are not labelled so I wouldnt know which are which.

I would be willing to sell you a couple different variants of the M14 gas tubes for the selling price they have and since 90% of my conversions have been either CYMA or AGM there is an extremely high likelihood that one or both would work fine.

PM me if you want to pursue this. I have a ton of m14 spare parts rangung from stocks, butt plates and flaps, flash hiders, heat shields etc.

[madmarcs]

Thanks for the offer, i will keep it in mind. Just so you know my particular model is the kind that secures with a small hex screw on the top of the gas tube if that helps you figure out what would fit.

[2nd Bat]

with that information (hex screw on top) I can pull out exactly what you need. definitely cheaper than E PAY!