|
Post by nile on Apr 23, 2011 8:33:21 GMT -5
More bolt actions that are not much more expensive then lets say a utg master sniper. They may be made of Abs, but there could always be wood kits that the companies produce too. I'm getting sick of tons of AEGs wasting ammo. I would really want a Lee Enfield or Garand for sure. I don't know why the companies are holding back. WW2 riffles would bring in tons of customers.
|
|
HornetWSO
Private 1st Class
"We may not have a history, but we have a rendezvous with destiny!"
Posts: 551
|
Post by HornetWSO on Apr 23, 2011 9:49:17 GMT -5
More bolt actions that are not much more expensive then lets say a utg master sniper. They may be made of Abs, but there could always be wood kits that the companies produce too. I'm getting sick of tons of AEGs wasting ammo. I would really want a Lee Enfield or Garand for sure. I don't know why the companies are holding back. WW2 riffles would bring in tons of customers. Econ 101; supply and demand. Fortunately our community is growing, and when the demand hits a critical point, companies will supply the Garands, K98's, SMellies, ect
|
|
SgtSalmon
Private
Sarge! Do you see this?
Posts: 70
|
Post by SgtSalmon on Apr 24, 2011 2:13:33 GMT -5
I would like: Type 100, M1 Garand, and M1 Carbine AEGs Gas M1897 Trench Gun and Ithaca Stakeout Spring Springfield Edit: On second thought, there are too many Garands in early production to be wanting one. ICS, DBoys, G&G, Marushin.... the list goes on and on... On top of that, I'm finally getting my M14 to M1 conversion done.
|
|
|
Post by aj czarkowski on Apr 25, 2011 19:46:07 GMT -5
I would like: Edit: On second thought, there are too many Garands in early production to be wanting one. ICS, DBoys, G&G, Marushin.... the list goes on and on... On top of that, I'm finally getting my M14 to M1 conversion done. Actually it doesn't go on, you listed all of them. And DBoys M1 Garand is fake, G&G is probably fake, Marushins isn't fake but it sucks, and ICS isn't coming out for another year
|
|
SgtSalmon
Private
Sarge! Do you see this?
Posts: 70
|
Post by SgtSalmon on Apr 26, 2011 2:10:39 GMT -5
I would like: Edit: On second thought, there are too many Garands in early production to be wanting one. ICS, DBoys, G&G, Marushin.... the list goes on and on... On top of that, I'm finally getting my M14 to M1 conversion done. Actually it doesn't go on, you listed all of them. And DBoys M1 Garand is fake, G&G is probably fake, Marushins isn't fake but it sucks, and ICS isn't coming out for another year ....Alrighty.
|
|
|
Post by FlyingSquirrelcat on Apr 26, 2011 5:53:06 GMT -5
Bout to say someone just threw down tha law Haha no but it's ture, anything Dboys makes is gunna be cheap and not worth the buy unless youll be doing some serious modifications. I'd personally really like to see a spring Arisaka, you know to get the PTO more enthusiastic or a really expensive type 99(so only few people had one) to spur something up. An electric M1 Carbine would also be pretty sexy.
|
|
|
Post by airsoftboy1172 on Apr 28, 2011 12:17:55 GMT -5
need 1903 springfield
|
|
|
Post by thisissparta on May 1, 2011 10:49:02 GMT -5
ebb m1 carb ebb m1 garand Clip Eject! and that's about it. GBBs are apain
|
|
cairo1
Private 1st Class
Posts: 494
|
Post by cairo1 on May 4, 2011 0:52:15 GMT -5
Personaly, i think EBBs are a waste. they must drain your battery alot faster and for no additional performance.
|
|
|
Post by thisissparta on May 4, 2011 16:01:54 GMT -5
i like the realism
|
|
cairo1
Private 1st Class
Posts: 494
|
Post by cairo1 on May 4, 2011 21:56:47 GMT -5
i like my gun t keep working. more moving parts just means more maintenance and more parts to break. then the ditractions from battery power.
|
|
|
Post by thisissparta on May 12, 2011 15:47:27 GMT -5
my vote for the 1903 springfield just for all of us early marine corps reenactors!
|
|
|
Post by patman on May 22, 2011 18:37:13 GMT -5
My wishlist is as follows
M1 aeg 15-20 shot mag feed M1 aeg carbine kar springer Mossin spriger Lee enfield springer
I do allso think that we need the standard weapons of each of the armed forces.
As me being a finn it would be nice to see a suomi M/31, cant really be that hard to make since we have two ppshs. Im for the svt 38 or 40 aeg allso. Thats a weapon that goes for russian german and finnish impressions.
sorry for my bad english its late and im tired
|
|
|
Post by nkn538 on May 22, 2011 18:55:25 GMT -5
mosin nagant springer is already being taken care of, but one in the states wouldnt hurt
|
|
|
Post by thisissparta on May 22, 2011 19:41:10 GMT -5
it's surprising only one company has made the browning 1919. It could also be used as a modern mg.
|
|
|
Post by patman on May 22, 2011 23:48:34 GMT -5
mosin nagant springer is already being taken care of, Yes its been taken care of but its a 44 not for example 91/30 whits would be a better choice for us Finns. But i guess that we have to be satisfied whit what we got. And yes i think its great that there is the zeta lab mossin out there.
|
|
|
Post by redeemer on May 23, 2011 5:41:20 GMT -5
A Mosin Nagant is very cool, but i heard that the Zeta Lab model is crap. Is that right? Well, my airsoft i want made:
1. a gas-powered,affordable StG44 2. G43 semiAEG 3. MP41 AEG 4. M1 Carbine 15/20 rounds 5. MKB 42 6. MG42 AEG or gas-powered, but affordable...
|
|
Sgt_Tom
Technical Sgt.
Combat!
Posts: 3,580
|
Post by Sgt_Tom on May 23, 2011 9:30:08 GMT -5
Nope the Zeta Labs Mosin is a very nice gun.
|
|
|
Post by thisissparta on May 23, 2011 14:40:14 GMT -5
A Mosin Nagant is very cool, but i heard that the Zeta Lab model is crap. Is that right? Well, my airsoft i want made: 1. a gas-powered,affordable StG44 2. G43 semiAEG 3. MP41 AEG 4. M1 Carbine 15/20 rounds 5. MKB 42 6. MG42 AEG or gas-powered, but affordable... AGM mg42 for 500 dollars i think is affordable for an mg so you could get that when it comes out
|
|
|
Post by redeemer on May 23, 2011 16:13:21 GMT -5
thisissparta: I know 500 is a good price for a mg 42. But how long there a rumors about an AGM Mg42? years?
|
|
|
Post by thisissparta on May 23, 2011 16:18:30 GMT -5
August 21st i hear is when it's coming and it and the ppsh were delayed because China shut them down but they're back!
|
|
stuka
Sergeant
The one and only
Posts: 1,205
|
Post by stuka on Nov 3, 2012 15:50:57 GMT -5
why not be simple? one main rifle, a smg and a support weapon per nation?(the main five) JP:Arisaka(type 38 or 99), type 100(basically a sten with wood furniture), and the type 99 lmg(with bayonet and bayonet lug, rubber of course =P) GR:K98k, mp40(I know we have agm but a little competition isn't bad), mg42(As it has already been said, cheaper) US:M1 Garand(I know that g&g and ics are coming out with one), thompson(perhaps, for the winy people an accurate 1928), a 1918 bar(for those who don't know, a china one came out and is ~600$ to get it shipped from airsoftworld.net which is in england and has vat taxes etc.) BR:Lee Enfield No.4, sten(like i said earlier, more competition isn't bad), and of course a bren. RU:Mosin Nagant, PPSH-41(More competition again), DP28 For all bolt actions,I would like them to be springers.(Might be easier then gbbs, not sure.All full/semi-autos would be aegs)
Possible substitutions:K98k-G43, Mg42-Mg34,Arisaka-(their attempt at a semi auto),BAR-M1919, Mosin Nagant-SVT40,PPSH41-PPS43
|
|
stuka
Sergeant
The one and only
Posts: 1,205
|
Post by stuka on Nov 3, 2012 16:02:58 GMT -5
For pistols even though,from my understanding, only officers had pistols(plus the occasional capture).I would like them to be affordable and could be WE KWA etc. as long as it's usable and affordable
First the, already commonish and already made TT-33 1911 Luger C96(A full-auto model would be kwel)
Next the not so common or un-made Nagant Revolver(Can never have enough revolvers) Liberator(Why not?) Nambu(Not so common, plus it's kinda expensive)
All I can think of as of now
|
|
|
Post by migliore1 on Nov 3, 2012 16:45:10 GMT -5
i would like G&G or KWA to make AEG STG44 gas powered walter p38 pistol
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on Nov 3, 2012 18:39:36 GMT -5
Since we now have several very good and reasonably priced MP40s,an excellent StG 44, a sten, a Mosin Nagant a couple functional Grease guns, the two Garand AEGs at long last coming as well as the new BAR the obvious holes are a springer, quality Kar 98, a similar 1903 and an AEG M1 carbine. further down the line a G43 and SVT 40.
|
|
|
Post by shiftsup on Nov 3, 2012 19:19:36 GMT -5
I'd like to see a manufacturer come up with a Sten MKIII and a MKV aeg or gas.
|
|
|
Post by Rekkon on Nov 4, 2012 8:20:47 GMT -5
C96(A full-auto model would be kwel) Et voila.
|
|
|
Post by tommyhawk on Jan 2, 2013 18:58:43 GMT -5
We need to get the bolt actions in like an enfield mosin kar 1903 but i first think we NEED the M1 it was literaly the gun of the war for the US Or as General Patton put it, the finest battle implement ever devised. Personally, I would like to see a DURABLE and yet cheap k-98 (Gas or spring, whatever is under $200), as well as an M1. Probably the biggest obstacle to ww2 airsoft is PRICE! Trust me, if it's cheap and yet good, you will sell so many that it will offset the low cost.
|
|
2nd Bat
Master sergeant
Posts: 11,813
|
Post by 2nd Bat on Jan 3, 2013 1:47:06 GMT -5
The m1 is now on PRE-ORDER ( which really just means they are taking money on rifles that are still "coming"). But it does at long last feel like an AEG GARAND is pending and relatively imminent. EVIKE says they expect to ship them to the pre orders in February (Im anticipating March or early April). The price delivered for an all wood and steel M1 Garand is $303.00 delivered which is better than I had anticipated and may just come down further!!!!! With the ECHO 1 BAR and the two Grease guns the US is well handled. AEG Carbine and quality Springer Springfield the only thing left on my wish list. With the STG 44 and MP40s the Krauts are really in need of a cheap but effective Kar 98. (Springer no cartridges)
The Brits now have their Stens and The Russians have several PPSHs and Nagants so things are looking good. The Japanese Army is the only key belligerant desperate for some offerings.
The G43 remains a nice hole for the Germans which Im surprised no one has filled.
|
|
|
Post by kingraptor141 on Jan 3, 2013 15:41:10 GMT -5
The m1 is now on PRE-ORDER ( which really just means they are taking money on rifles that are still "coming"). But it does at long last feel like an AEG GARAND is pending and relatively imminent. EVIKE says they expect to ship them to the pre orders in February (Im anticipating March or early April). The price delivered for an all wood and steel M1 Garand is $303.00 delivered which is better than I had anticipated and may just come down further!!!!! With the ECHO 1 BAR and the two Grease guns the US is well handled. AEG Carbine and quality Springer Springfield the only thing left on my wish list. With the STG 44 and MP40s the Krauts are really in need of a cheap but effective Kar 98. (Springer no cartridges) The Brits now have their Stens and The Russians have several PPSHs and Nagants so things are looking good. The Japanese Army is the only key belligerant desperate for some offerings. The G43 remains a nice hole for the Germans which Im surprised no one has filled. G&G is in the works with a G43, there's a thread on here somewhere about it, I'll find it later though I'd like more allied weapons, to be honest, I would have gone US airborne had they a reasonably priced, reliable and preferably AEG M1 carbine, all the allies have are the Thompsons (which I don't actually care for), a Sten gun (cool, but doesn't work for US impressions) a WAY over priced BAR, and a limited run BAR that's still pretty high, I'd love to see a Garand, can't wait for ICS's, but I fear that price tag. Hoping that WWII airsoft gains popularity and the demand for more, better priced fieldable guns (rather than the wall hangers) comes in, and things like the AEG's drop in price, and jump in quantity. Oh and an MG42 please
|
|